Rent a laser cleaner – mobile laser rust removal & paint stripping

Rust, paint, scale, oxide, oil and grease layers, coatings and weld seams – above all on metal and stainless steel. Stone and wood only after a test. Cleaning is contactless and without blasting media.

Yes. Oxidation, weld discolouration, grease and light contamination are removed residue-free without attacking the stainless steel.

Metal is the core application. We only clean stone, natural stone and sculptures after a test, because a 2 kW fiber laser introduces heat and can cause discolouration. Here dry ice blasting is often the gentler solution.

Paint can be removed from wood, but only after a test – the fiber laser introduces heat and can scorch delicate woods. For sensitive surfaces we recommend dry ice blasting.

Yes. Engine parts, cylinder heads, gearboxes, moulds and tools can often be cleaned directly without disassembly.

Yes. Non-ferrous metals can also be freed of oxidation, grease and coatings.

As a rule from approx. 1 mm thickness. Very thin or heat-sensitive surfaces we discuss beforehand.

Practically all common paints, coatings, powder coatings and primers can be removed from metal and wood.

The laser is precise and ideal for heat-resistant, metallic surfaces and uses no blasting media. Dry ice blasting is the gentle choice also for sensitive or non-metallic substrates. We offer both and advise what fits.

The laser is laser class 4. Laser safety goggles matching the 1080 nm wavelength are mandatory, the laser area must be enclosed (mobile safety screens, warning lights), plus protective gloves. A safety package can be rented along with it.

230 V, 32 A CEE, power draw approx. 6.5–8 kW. If no suitable site power is available, a mobile diesel generator (10 kVA) can be rented in addition.

Yes. With the matching generator (230 V, 32 A CEE, 10 kVA) you work independently of the mains on the construction site or on location.

Yes – you receive the mandatory safety and operating instruction (€120 net, one-time) at our yard in Hanhofen. For regular operation of a class 4 laser a laser safety officer is additionally recommended (§ 5 OStrV / DGUV 303-005).

Yes. Before the first rental a one-time device and safety instruction for €120 net is mandatory (not included) – at our yard in Hanhofen. It only needs to be completed once; for follow-up rentals it is no longer required. It does not replace the laser safety officer and the risk assessment in your own business.

No. The device and safety instruction shows you the safe operation of this device. It replaces neither a laser safety officer (LSO) nor the risk assessment, the definition of the laser area and the (annual) instruction in your own business. As the operator (employer at the place of use) you are responsible for these (OStrV, TROS Laserstrahlung, DGUV 303-005). We advise you and provide the relevant documents.

To rent, you need a laser safety officer (LSO) in your business. If none is available, the LSO must be trained before the rental. You present the proof (written appointment / course certificate) before handover. We are happy to arrange a suitable LSO course.

A small air compressor is needed to cool the laser lens. It is already included in the rental price of the laser cleaner.

The minimum rental period is 3 working days.

Extension cables for the power supply, extensions for the air line, plus safety equipment such as laser safety goggles, protective gloves and mobile free-standing safety screens – all on request.

Pickup and instruction always take place at our yard in Hanhofen (except in exceptions). As a rule we do not offer delivery.

That depends on the material and degree of contamination. We advise you based on your specific application and can demonstrate the device.

Technically the device is a 3-in-1 system. However, only the cleaning mode is rented out.

Limits apply to very thin (below approx. 1 mm) or extremely heat-sensitive surfaces and some delicate plastics. In such cases we advise you – often dry ice blasting is the gentler choice.